CV 14674

Finished another CV wagon. This one made out of styrene. Roof is dried out hand wipe over planked styrene. Most other details as per S wagon. This one a little cheaper as the brake cylinder is made from scrap sprue. The lettering is printed on an inkjet printer, coated with flat enamel then thinned down by rubbing on sandpaper and attached with PVA.

Fully planked S wagon

Just completed a fully planked version of the S wagon apart from some weathering. Made from scrap ply , paper, card, tie wire, phone wire and tea bag strings.
The W irons, wheels, couplers and the K brake being other peoples work (GME, Slaters and Kadee).
The brake shoes are an experiment using tie wire and solder. The brake spiders are cardboard soaked in shellac.
Total cost - about $40